From order, we are aiming for 4 to 7 working days to have handbrakes ready to dispatch , all handbrakes are built to order currently
We use genuine Microsoft parts in our product so the following ban on third party products does not affect our product and will work no issues after the 12th
Third party xbox products will not work after Nov 12th Click to see article
handbrake Includes a 1 month xbox game pass ultimate code
(turn recurring billing off after activating the code)
you can play the New Forza for free , WRC 23 free 5 hour trail , and quite a few other racing games with EA play and game pass
sequential shifter support (£5 extra )
Our SimRlink™ receiver now has added support for a sequential shifter if you choose this option
A Diy box is linked below that can be used with this feature
https://simrtec.co.uk/diy--simrlink-console-sequential-shifter-box-832-p.asp
We have also converted a PC sequential shifter which will work with the above diy box if we start selling the sequential shifter
XBOX ONE / Series S / X USB Plug and play Wireless handbrake using SimRlink™
Works with all wheels logitech , thrustmaster and more
How it works
Our handbrake operates as an extra controller using the B button or X button when you pull the handbrake
It has 3 modes , these are changed using push button when switch is up on MSB module on MSB module on front of handbrake
mode 1: B button mode
mode 2: X button mode
mode 3: Forza mode using B button (switches handbrake on and off very fast see below for more info)
You can use the handbrake and clutch pedal at the same time unlike the other version we sell.
The Handbrake uses our SimRlink™ wireless technology to connect to the handbrake.
Our handbrake can be power by 3 X AAA batteries making the handbrake completely wireless , or you can power it with provided USB cable
Whats included
You get a SimRlink™ receiver + MSB Pro handbrake the SimRlink™ receiver plugs into the xbox USB port and communicates with the MSB Module on the front of the handbrake wirelessly
Compatibility
This only works with XBOX ONE / X , Xbox Series S / X consoles works with all wheels on the market for the console mentioned
Games that we have tested and work with MSB Pro handbrake
Need for speed Unbound | heat (Using X button mode)
Crew 2 , Crew motorfest (Using X button mode)
GRID (no setup needed)
GRID Legends (needs testing but believe it should work ok)
Dirt 2.0
Dirt 2.0 Setup video , Click here
WRC 23 no setup needed using B mode
DIRT 5 (No setup needed )
Forza horizon mode added
See below issue with Forza we have added an extra mode to our MSB handbrake module
when the 2nd switch is down this is normal operation when handbrake is active (red led on)
2nd switch up will cut the handbrake in and out (when handbrake is active) this allows the below issue with Forza to not be as affected by it so you can regain control of the car even if the handbrake is held on , where as before you would have no controls until the handbrake was let go. We will try to get videos up of the issue and our Forza mode so the differences can be seen.
Click here for video showing Forza issue
Forza Motorsport suffers the same issue as below
The Forza Horizon issue
Forza Horizon 4 (works but we have noticed when using the handbrake all the wheel controls lock out until the handbrake is released and a pedal is pressed for example you loose steering (just stays centred in game) while handbrake is pulled , you loose throttle and also gear change soon as you let go of the handbrake the wheel controls come back in.(after you press a pedal for example throttle)
we recommend when using the handbrake with this game to pull handbrake get sideways then let go and do it again if you need more handbrake to not leave it pulled back for very long as you will loose all steering and throttle
Forza Horizon 5 the above issue also effects this game
WRC 9
WRC 10
WRC Generations
WRC Generations , 10 , 9 setup video Click here
CarX Drift Racing
Car X Setup video, Click here
Need for speed Heat (use the X button mode)
Games that do not work
Forza motorsport 7
Need for speed payback
asseto corsa
assetto corsa competizione (no handbrake option in game)
Please check the games you wish to play allow this option in set up if not on our working / not working list
to test the games you wish to play , plug in a external controller , set the handbrake button to B and see if you get the handbrake if you press B on external controller if you do our handbrake will work if not you either need to map it correctly to the external on controller on B button or it will not work on external controller.
Programmable braking point
Our new version MSB handbrake has a push button that you press to set your braking point from the braking point the MSB handbrake calculates the output from 100% (the chosen braking point) to 0 which is the rest position of the handbrake.
Click here for video
Mounting options for handbrake
Direct fit for atmega with gear mount
Playseat pro
We do know have a solution for Playseat pro gear mount, our handbrake bolts behind the gear shifter, please select the PS option (£5 extra) please see photos on how it fits. The handbrake sits 35mm off the playseat pro mount (see photos).
Playseat Challange / Playseat with out pro mount + £2.50
MUST BE THIS MOUNT BELOW
Link to Play seat amazon mount
our mount will only fit this product from amazon choose PSC mount for this option
To fit this mount you need to remove the bolt and springs to gain access to the allen key bolts (M8) a 13mm spanner can do this this unwind take springs / washers off then fit part to mount then put back together
amazon universal mount (fits with no extras needed)
we recommend using M8 bolts rather than the bolts they supply
Link to universal amazon mount
Requires USB power cable to be plugged in (cable only provided)
Mounting Handbrake
We know this will fit the GT Omega Rigs such as ART , we do not have a standard mounting solution currently and are looking into this.
Additional Desk Clamp Mount + £10
The Clamp mount has a full closure of about 15mm so if what you are clamping to is less that 15mm thick we will need to add a 3D printed spacer so please message us to let us know you need this option if required
The price of the clamp mount could increase at any point due to sourcing costs we have priced it at just £10 currently this could change at any point (hopefully no more than £12)
Playseat pro
We do know have a solution for Playseat pro gear mount, our handbrake bolts behind the gear shifter, please select the PS option (£5 extra) please see photos on how it fits. The handbrake sits 35mm off the playseat pro mount (see photos).
