product review overlay image

Product Description

Playstation 5 , PS5 MSB Pro+ wireless USB Plug and play handbrake using SimRlink

Progressive and button mode 

How it works

Our handbrake operates as an extra controller using Sony registered parts to connect to the PS5 console. with 4 modes , the modes are switched on the MSB module on handbrake

Progressive mode : switch down  this outputs a variable value based on where the handbrake is through  its travel so handbrake can be 35% , 50% , this gives more control of handbrake braking , this mode uses the left stick down input 

Button mode : Switch up ,

When in this mode pressing the push button will cycle between O button , Square button and X button as button used when you pull the handbrake 

this mode  is on / off when red light is on handbrake is active , when red light is off handbrake is off 

The Handbrake uses our SimRlink wireless technology to connect to the handbrake.

Included is a  SimRlink™ receiver + SimRlink handbrake the  SimRlink receiver plugs into the PS5 USB port and communicates with the MSB SimRlink on the front of the handbrake 

Wireless use requires 3 x AAA battery's *not supplied* a usb cable is also supplied 

Optional sequential shifter support (£5 extra )

Our SimRlink™ receiver now has added support for a sequential shifter if you choose this option 

We now sell a sequential shifter, this is a PC shifter that we have converted to work with our SimRlink shifter box

https://simrtec.co.uk/sequential-shifter--simrlink-xbox--ps4--ps5--console-1128-p.asp

and if you want to make your own sequential shifter then all you need is our DIY box (same used with shifter above you only need 2 switches 1 for up shift one for down the rest is up to you 

https://simrtec.co.uk/diy--simrlink-console-sequential-shifter-box-832-p.asp

Whats included

SimRlink receiver

MSB Pro+ handbrake 

2 X USB cables 

1 X 3.5mm audio cable

Instructions are sent via email after dispatch

Compatibility  

The MSB Pro+ handbrake works with the PS5 only and all wheels on the market including Logitech Pro wheel 

Games that we have tested and work with MSB Pro+ wireless handbrake using SimRlink

Need for speed Unbound (Use Square button  mode)

Crew Motorfest (use Square button mode)

Grand Turismo 7 (button mode will not work with progressive mode)

GT Sport (button mode will not work progressive mode)

Dirt 2.0  | Button mode and Progressive mode 

EA WRC 23  | Button mode and Progressive mode

DIRT 5 | Button mode and Progressive mode

WRC Generations , 10 , 9 | Button mode and Progressive mode

CarX Drift Racing | Use X button mode for no setup , Progressive mode 

Need for speed heat (use Square button mode)

Need for speed unbound (use Square button mode)

Crew 2 (use Square button mode)

Games that do not work

Assetto corsa 

ACC (no handbrake in game) 

Project cars games

Programmable braking point

Our new version MSB handbrake has a push button that you press to set your braking point from the braking point the MSB handbrake calculates the output from 100% (the chosen braking point) to 0 which is the rest position of the handbrake.

Click here for video showing how it works

Mounting options for handbrake 

most Sim rigs / wheel stands can use the universal mount option (£10)

the shifter goes underneath this mount and the handbrake next to it

Playseat Evolution pro

if you have a gear shifter on the mount you will need the Universal mount but if you don't have one you can use our M6 2 bolt option and this puts the handbrake where the shifter would be and is only (£3 extra)

Playseat Challange / Playseat with out pro mount + £3

you can use the  universal  mount option with any mount you already have that fits a Logitech shifter if you have a shifter already attached to your setup

Playseat under steering wheel bar mount option

Click here for UK Playseat R.A.C.00168 Amazon link

Click here for USA Amazon link for mount

Purchase the above the link and then choose PSC mount 

our mount will only fit this product from amazon choose PSC mount for this option

To fit this mount you need to remove the bolt and springs to gain access to the allen key bolts (M8) a 13mm spanner can do this this unwind take springs / washers off then fit part to mount then put back together

M6 2 bolt mount (£3 extra)

This mount can be used with most standard gear shifter mounting plates that come with racing chairs from popular brands this mount has the same hole spacing as a Thrustmaster gear shifter  , this mount can only be used with those if you do not have a shifter mounted on the standard plate

Additional Desk Clamp Mount + £12

The Clamp mount has a full closure of about 150mm so if what you are clamping to is less that 15mm thick we will need to add a 3D printed spacer so please message us to let us know you need this option if required

Contact Us

If you have any questions on how to return your item to us, contact us at simrtec@gmail.com 

 

Delivery & Returns

Dispatch time 

All Products are built to order Order 

Orders will be dispatched with in 5 to 7 days but this time could be less 

 

We are now shipping to USA and Canada as well as the UK 

 

No EU shipping (to many extra costs)

 

 

Return & Refund Policy

Thanks for shopping at SimRtec. If you are not entirely satisfied with your purchase, we're here to help. Returns You have 14  calendar days to return an item from the date you received it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be packaged in suitable packaging so not to damage the item on return.

 

Return for non working item

We always try to resolve non working item issues via email , so if you get your item and can not get it working as you expect please email us simrtec@gmail.com , in the event we can not get the item working via email , and a part failure is causing the issue we try to send out parts ( to save sending the item back ) , but at this point if you wish to return the item you can , if we find we are at fault we will discuss options case by case basis for international returns, UK returns is not an issue just return item

Refunds

Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item. If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the refund to the method of payment used to purchase the item. within 7 working day , depending on your card issuer's policies.

 

Shipping

 

we will send you a returns label were you can go to post office with a QR code or print label (UK only)

2 Customer Reviews

MSB Pro+ Progressive PS5 . Playstation 5 wireless Handbrake , USB, SimRlink™ , All wheels

Item in Stock

Black
Silver
Blue
Red